Kingmaster International Trade (Tianjin) Co.,ltd-京登威国际贸易（天津）有限公司
 



 

京登威国际贸易(天津)有限公司
      
KingMaster International Trade(Tian Jin) CO.,LTD
     
其他汽修工具
other tools

NO.KM-585

5PCS COMBINED STRIKING TOOLS SET
5件套冲子

CR-V

NO.2 3 5 12 4 mm
高质量铬钒钢锻造

NO.2 3 5 12 4 mm
NO.KM-8P

8PCS PIN PUNCH SET
8件实心冲子组

CR-V
(FROM LEFT TO RIGHT)
1.6 /2.3/ 3.2/ 4.0 /4.8 /5.5 /6.4 /8.0
高质量铬钒钢锻造
(FROM LEFT TO RIGHT)
1.6 /2.3/ 3.2/ 4.0 /4.8 /5.5 /6.4 /8.0
NO.NS-4

4 PCS NUT SPLITTER (CR-V)

4件螺帽破開器 鉻釩鋼

NO.1 5/16-1/2 9-12mm
NO.2 1/2-5/8 12-16mm
NO.3 5/8-7/8 16-22mm
NO.4 7/8-1 1/16 22-27mm

NO.1 5/16-1/2 9-12mm
NO.2 1/2-5/8 12-16mm
NO.3 5/8-7/8 16-22mm
NO.4 7/8-1 1/16 22-27mm
NO.KM-2000

HYDRAULIC NUT SPLITTER SET

油壓螺帽破開器

Content:
1pc hydraulic nut ram
5pcs splitter body diameter capacity
3/8”1/2”5/8”3/4”1”
1pc threaded attachment sleeve
1pc oil bottle
组件:
1件液压螺帽螺杆
5件破开器直径为
3/8”1/2”5/8”3/4”1”
1件辅助套
1个油罐
NO.SE-5A

5 PCS SCREW EXTRACTOR SET

5件斷頭螺絲取出器 鉻钼鋼

NO1. 1/8-1/4 3-6mm
NO2. 1/4-5/16 6-8mm
NO3. 5/16-7/16 8-11mm
NO4. 7/16-9/16 11-14mm
NO5. 9/16-3/4 14-18mm
Chrome Molybdenum Scm-440

NO1. 1/8-1/4 3-6mm
NO2. 1/4-5/16 6-8mm
NO3. 5/16-7/16 8-11mm
NO4. 7/16-9/16 11-14mm
NO5. 9/16-3/4 14-18mm
铬钼钢-440
NO.SE-5B

5 PCS SCREW EXTRACTOR SET

5件斷頭螺絲取出器
NO1. 1/8-1/4 3-6mm
NO2. 1/4-5/16 6-8mm
NO3. 5/16-7/16 8-11mm
NO4. 7/16-9/16 11-14mm
NO5. 9/16-3/4 14-18mm
 
NO.SE-6A

6PCS SCREW EXTRATOR SET
6件断头螺丝取出器

Specification:
N0．1 3—6
N0．2 6—8
N0．3 8—10
N0．4 10—14
N0．5 14—18
N0．6 18—24

螺丝取出器规格 相应的螺栓规格
N0．1 3—6
N0．2 6—8
N0．3 8—10
N0．4 10—14
N0．5 14—18
N0．6 18—24
NO.KM-1037

25 PCS SCREW EXTRACTOT/DRILL&GUIDE SET
25件断头螺丝取出器组

Fluted typed extractors that provide a solid grip on
broken studs and screws.
These screw extractors do not expand the screw while
turning and their special design ensures a positive
grip when driven into the drilled out hole.
Drill size is stamped in each extractor for ease of
identification. Range :3/16” to 9/16” (5 to 16mm)

凹槽设计更易取出损坏的螺丝或螺杆。
该取出器工作时不会损伤被取出物，并且其特殊设计可保证
抓取的牢固稳定。（尤其对汽车缸盖，效果更佳。）
每件钻子上标记有详细尺寸。
适用于3/16”到9/16” 即 5mm到16mm
（详细规格，请参考说明书）
NO:KM-62109

NORTRSTAR WATER PUMP SOCKET

冷却水泵浦套简

1 Used to remove and install the water pump on
cadillac Northstar 4.6 liter v-8 engines 1993
and later and oldsmobile Auraro 4.0 liter v-8
engines 1997 and later.
2 Enhanced duralibility
3 More strength and control in removing and
replacing water pump impeller


1用于取出及安装水泵，适用于卡迪拉克北极星4. 6升V－8引擎1993及改进引擎，
以及AURORA 4.0升V-8引擎1997及改进引擎
2坚固耐用
3取出或装入水泵叶轮时更省力，易操作.
NO.KM-1032
EXTERNAL THREAD RESTORER FILES AND PITCH GAUGE SET
五件螺纹修护组（附牙规）

Restore tool for renewing damaged thread on any diameter bolt, stud , axle or shaft file both right and left hand threads.
Content:
3 pcs thread file pitch size
1: metric file 0.75 1.0 1.25 1.5 1.75 2.0 2.5 3.0mm
2: sae file 11 12 13 14 16 18 20 24
3: sae file 9 10 12 16 20 27 28 32
2 pcs gauge size:
1: 0.4 0.45 0.5 0.6 0.7 0.75 1.0 1.25 1.5 1.75 2.0 2.50 3.0 3.50 4.0 4.50 5.0 5.5 6.0
2: 4 4.5 5 6 7 8 9 10 11 12 14 16 18 19 20 22 24 26 28 32 40 48

修复各种损坏的螺栓螺纹.
组件：
3件螺纹修护锉刀尺寸：
1： 0.75 1.0 1.25 1.5 1.75 2.0 2.5 3.0mm
2: 11 12 13 14 16 18 20 24
3: 9 10 12 16 20 27 28 32
2件标尺
1: 0.4 0.45 0.5 0.6 0.7 0.75 1.0 1.25 1.5 1.75 2.0 2.50 3.0 3.50 4.0 4.50 5.0 5.5 6.0
2: 4 4.5 5 6 7 8 9 10 11 12 14 16 18 19 20 22 24 26 28 32 40 48
NO.KM-6312
10PC BEARING RACE AND SEAL DRIVER-MASTER SET
10件組軸承及油封圈裝入器
Size:
1.565"(39.75mm) 1.75"(44.45mm) 1.965"(50mm) 2.325"(59mm) 2.47"(62.74mm) 2.555"(65mm) 2.83"(71.88mm) 2.995"(76mm) 3.18"(80.77mm)
尺寸:
1.565"(39.75mm) 1.75"(44.45mm) 1.965"(50mm) 2.325"(59mm) 2.47"(62.74mm) 2.555"(65mm) 2.83"(71.88mm) 2.995"(76mm) 3.18"(80.77mm)
NO.KM-211
UNIVERSAL CLUTCH ALIGNING TOOL
离合器片修护器
1: Special design aligns and assembles clutch on the workbench for easy installation
2: Suit for front wheel drivers that have no pilot bearing in flywheel
3: Designed for most vehicles up to 5 tons with single plate clutches
1: 特殊设计能在工作台上轻松安装连接离合器片
2: 适合调速轮上没有飞行轴承的前轮驱动
3： 适合大部分5吨以下单盘离合器机车
7886

12 PCS A/C COMPRESSOR CLUTCH REMOVER KIT

12件空调压缩机离合器拆卸组

Replaces clutches found on FS6,C171,6P & 148 compressor,GM R4 & A6,DA-6 &V5 A/C compressor,sanden compressors SD505,507,510,575,708, & 709
2 & 3 hole puller plate fits most clutches， mechanical force does the pulling
Blow molded case for easy storage and transport
Case dimensions:(L)9"×(W)8"×(H)2"
Net Weight:1.36kg
可拆卸以下空调压缩机离合器
FS6,C171,6P & 148 压缩机,GM R4 & A6,DA-6 &V5 空调压缩机 SD505,507,510,575,708, & 709
2,3孔拉拔盘适用于大多数离合器，机械力拉拔
吹气盒便于存放和携带，
盒子规格 (L)9"×(W)8"×(H)2"
净重1.36kg
NO.KM-2020

UPPER CONTROL ARM BUSHING SERVICE SET

避震懸調杆修護器
NO.KM-6335B

5PCS DRIVER NUT SET
五件天线螺帽组

NO.1: 10.5MM VW GOLF REAR AXLE
NO.2: 12.5MM VW POLO FRONT AXLE
NO.3: 14.5MM POLO, GOLF, PASSAT AUDI 80
NO.4: 14.5MM AUSTIN MAESTRO
NO.5: 14 MM BENZ (W203)
适用车型
NO.1: 10.5MM 大众 高尔夫 后轴
NO.2: 12.5MM 大众 POLO 前轴
NO.3: 14.5MM POLO 高尔夫 帕沙特 奥迪80
NO.4: 14.5MM 奥斯丁(英制轿车)
NO.5: 14 MM 奔驰（W203)

NO.KM-7560

CLAMSHELL STRUT SPRING COMPRESSOR

張開式彈簧壓縮器
Capacity: 4" ～ 8" OD
Wire: 7/16" TO 11/16"
适用于: 4" ～ 8" OD
Wire: 7/16" TO 11/16"
KM-6357A
(KL-0005)

UNIVERSAL SPRING COMPRESSOR
避震弹簧压缩器

For use with all macpherson struts in which spring
pcessure does not exeed 8 000 N.
Max.load : 8 000 N Compression length: 65-320mm
Accessories: 1 pair of spindles for self-levelling
spring assemblies

适用于弹簧压力8 000牛顿以内
最大负荷： 8 000牛顿
可调节长度： 65－320mm
配件：一副弹簧测量杆
NO.KM-1557
DISC BRAKE PAD SPREADER
刹车碟片拆装器
Quickly compresses brake pistons for easy pad replacement suits front disc brake applications on most vehicles.
能迅速安装刹车碟片，适合大多数机车前轮刹车片.
NO.KM-740

DISC BRAKE CALIPER TOOL KIT
碟式刹车分泵拆装组
Fit most cars.
Wind back brake piston for replacing brake pads.
适用于大多数机车
用于更换刹车垫片.
NO.TB-3

3-IN-1 TUBING BENDER
3漕彎管器
6, 8, 10mm
6, 8, 10mm
NO.TCM-3
TUBING CUTTER & DOUBLE FLARING TOOL KIT
擴管器附切割把手
With this tool it is a simple matter either to flare or to swage soft copper, brass or aluminum tubing.
Flares 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", O.D tubing.
适用于：切割软铜，黄铜，和铝材质的管状物体.
尺寸：
3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8",
NO.TCP-10
TUBING CUTTER & DOUBLE FLARING TOOL KIT
擴管器附切割把手
Suit for pipe: 4, 6, 8, 10, 12, 15, 16
鑄造, 附7個折壘頭
吹氣盒
適用銅管規格﹔4, 6, 8, 10, 12, 15, 16
NO.KM-6355

EXHAUST SPRING CLAMP REMOVER/INSTALLER
排气管C型夹拆装器

Essential for safe,controlled removal of clamps attaching exhaust to manifold.
Special disign provides "leverage"required to expand the spring clamps
Volkswagen
安全，易操作的排气管夹拆卸必备工具，
特殊杠杆设计，可拆卸力量强大的排气管弹簧夹适用于大众系列汽车.
适用于大众系列汽车
NO.CJ-270

STEERING WHEEL REMOVER SET

方向盤修護器
Removing steering wheels of most domestic and imported vehicles,

Also works on older GM,AMC, and Chrysler vehicles with tilt or
conventional steering conventional steering columns.

Contained in convenient plastic storage tray.
用于拆卸大多数国产和进口车的操纵轮.

适用于GM,AMC,和 Chrysler机车

塑料盒包装

NO.KM-530

POWER STEERING PUMP PULLER KIT

動力方向盤修護器
Used to remove and install power pump pulleys in most domestic
cars: GM, FORD, CHRYSLER, VM with Saginaw, Thompson and
Ford C2 & C111 power steering pumps，also quick disconnect couple tool.

用于安装或拆卸大多数机车的动力滑轮，适用于通用，福特，克莱斯勒，VM，也是快速拆卸连接工具.
7847

Power Steering Pump Pulley Kit

五件动力方向盘皮带轮拆装器

works on ford,GM,& Chrysler vehicles with saginaw
Fits 1-1/8",1-1/4".1-5/16",1-3/8"pulley Hub Dia. Including 1988 to current GM cars equipped with Quad 4 engines, 1991 to current GM mini vans with 3.1L and 2800 v-6 engines,1991 to current Ford 4.6L engines with a metric shaft.
Includes spacer for power steering pump pulley installation on Chrysler irrus/jstratus /Breeze

适用于福特，通用，克莱斯勒机车
适用于1-1/8",1-1/4".1-5/16",1-3/8"皮带轮，包括以下机车：
通用Quad 4引擎1988至今机车
通用迷你3.1升2800 V-6引擎1991至今机车
福特4.6升1991至今机车
 
 
回页首
UP
  
2005版权所有 京登威国际贸易（天津）有限公司
TEL:86-22-23911572 23911053 FAX:86-22-23924652 EMAIL:13902086782@139.com WEB:http://www.kmastertool.cn